ControlEng Releases ServoSoft v2.3 |
Press Release
April 7, 2006 |
ServoSoft v2.3 with CAM Profiles, Sequence Templates,
and Thermal Overload Models
CAM profiles help users optimize motion profiles to minimize peak power,
improve energy efficiency, or select the optimum jerk
for the smoothest profiles to minimize backlash effects.
Sequence Templates make it easy to
define a sequence for Rotary Knives, Flying Shears and
Cut to Length applications. Enter a few parameters,
and ServoSoft generates the entire sequence.
The Pxt, Ixt and I2t overload monitoring
models are used to ensure Infeed Modules, Inverters
and Motors do not overheat when in an overload condition
for a prolonged duration. The continuous power and rms
current and torque values cover most conditions. However,
if the cycle time is very long, the rms and average
values can be minimized. The Overload Monitoring accounts
for this situation, by applying an exponentially weighted
time factor to the overload value.
|
6 new CAM motion profile types 
Electric machines