Add /
Edit Motor Data
The selected motor, DS71M45, is shown
in the Add / Edit Motor Data form. Change
any or all data under each tab. Click 'Add' to add
the motor data to the database.
Note 1:
The Model is the primary key in the database, and
must be unique.
Note 2:
After clicking the 'Add' button, if the same model
exists in the database, the user is prompted before
the old motor data is overwriten.
Tip:
The quickest way to add a lot of motors to
the database, is to use 1 motor as a template, and
then change the Model and only the data that is different
between motors. Typically, the Environment De-rating
curves are the same for a series of motors. So usually,
these curves are entered, and then re-used for other
motors in the same series.
Size
complete servo systems
